PRODUCTS
PRODUCTS

XINBIAN XINNENG - Provide One-stop Electrical Solutions

Categories

Contact us

Address:

Beizhougua Village, Chang'an Town, GaochengDistrict, Shijiazhuang City, Hebei Province, China

SC(B)10 Cast Resin Dry Type Transformer

SC(B)10 Cast Resin Dry Type Transformer

Their on core is made of imported high-quality cold-rolled silicon steel sheet, with a fully oblique seam structure, the core column is bound with F-grade non-lattice tape, and the surface oft hei ronco reis encapsulated with epoxy resin which reduces no-load loss, no-load current andiron core noise, clip sand fasteners are treated with special surface treatment, which further improves the appearance quality of the product.
View Details View Details
SC(B)12 Cast Resin Wound Core Dry Type Transformer

SC(B)12 Cast Resin Wound Core Dry Type Transformer

Core: High-quality silicon steel sheets, such as models 27Q130 and 27Q110, are used. Through processes like stepped lap joints, the hysteresis loss and eddy current loss of the core are reduced, improving the energy efficiency of the transformer.
View Details View Details
110KV Oil Immersed Power Transformer

110KV Oil Immersed Power Transformer

The core of 110kV power transformers is made of high-quality silicon-steel sheetsand laminated by steps, it is advantageous in low loss, low noise, and high short.circuit withstand capacity, etc, Now it is wildly used in power station, power plant. and gets high praise from them.
View Details View Details
35KV Oil Immersed Power Transformer

35KV Oil Immersed Power Transformer

35kV series transformers are with the following characteristics,low loss, low noise, protection against thunder and lightninghigh short-circuit withstand capacity and beautiful appearanceetc.
View Details View Details
SZ11-MOil Immersed Power Transformer

SZ11-MOil Immersed Power Transformer

The iron core is made of high-permeability grain-orientedcold-rolled silicon steel sheet, Fully oblique seam stackediron core,the iron core column has a multi-step circularcross section, and the iron yoke and the iron core have thesame cross section.
View Details View Details
S13 - M.RL Oil Immersed Power Transformer

S13 - M.RL Oil Immersed Power Transformer

The three-dimensional triangle rollis intimately composedof three identical single frames. The three core posts arearranged in an equilateral triangle.
View Details View Details
S(B)H15-M Amorphous Alloy Transformer

S(B)H15-M Amorphous Alloy Transformer

The three-dimensional triangle roll is intimately composedof three identical single frames. The three core posts arearranged in an equilateral triangle.
View Details View Details
S10 - M Single Phase Oil Immersed Distribution Transformer

S10 - M Single Phase Oil Immersed Distribution Transformer

The core is made of high-permeable grain-orientated topauality cold-rolled silicon sheet and the materlal is cut withadvanced Germany Geoge GmbH automatic shear line withthe cut burs controlled within 0.02mm.
View Details View Details
S9 Oil Immersed Distribution Transforme

S9 Oil Immersed Distribution Transforme

The iron core is made of cold-rolled grain-oriented siliconsteel sheets with high magnetic conductivity, with inclinedjoint laminated structure. Section of the core limbs is ofmulti-class ladder round, with uniform section with that ofyoke.
View Details View Details
S11 Oil Immers Distribution Transformer

S11 Oil Immers Distribution Transformer

The iron core is made by crystal grain-oriented silicon-steelsheet, GEORG cross cut shear (made in West Germany) isadopted to cut the silicon-steel sheet with a 45yoint seam,fold the sheet into a multistage roll cross-section to reducethe noise and power consumption.
View Details View Details
S13-M On-load Oil Immersed Power Transformer

S13-M On-load Oil Immersed Power Transformer

The iron core and the burning group each adopt fasteningmeasures, which can withstand the shock of transportation.The coil and iron core are vacuum-dried, and the transforme!oil is vacuum-fitered and oi-filled to minimize moisture insidethe transfomer.
View Details View Details
S15-M Oil Immersed Distribution Transformer

S15-M Oil Immersed Distribution Transformer

S15 transformers operate based on the principle of electromagnetic induction.
View Details View Details
S18-M Oil Immersed Distribution Transformer

S18-M Oil Immersed Distribution Transformer

According to the regulations of "GB 20052-2020 Energy Efficiency Limits and Energy Efficiency Grades of Power Transformers", the S18 transformer belongs to the third-level energy efficiency standard.
View Details View Details
S20-M Oil Immersed Distribution Transformer

S20-M Oil Immersed Distribution Transformer

Advanced core materials and structural designs, as well as optimized coil winding designs and insulating materials are adopted, making the magnetic circuit more compact and uniform, reducing magnetic resistance and eddy curent losses.
View Details View Details
S22-M Oil Immersed Distribution Transformer

S22-M Oil Immersed Distribution Transformer

Advanced core materials and structural designs, as well as optimized coil winding designs and insulating materials are adopted, making the magnetic circuit more compact and uniform, reducing magnetic resistance and eddy current losses.
View Details View Details
Mine explosion-proof mobile substation

Mine explosion-proof mobile substation

Mine Flame proof Dry-Type Transformer: Their on core is made of high-quality cold-rolled silicon steel sheets, with a fully inclined non-punched structure. The insulation class isBo rH, and itis air-cooled.
View Details View Details
Traction transformer for coal mining machine

Traction transformer for coal mining machine

It can operate safely in mines with explosive risks where methane mixtures and coal dust are present. It has features such as being flame-retardant, having high fireproof performance and not producing harmful gases.
View Details View Details
SC(B)10 - RL Cast Resin Wound Core Dry Type Transformer

SC(B)10 - RL Cast Resin Wound Core Dry Type Transformer

The three-dimensional triangle structure is adopted, and the arrangement of the iron cores is more rationally combined, Three identical single frames are used to form a three-dimensional equilateral triangle, so that the three-phase iron core magnetic circuit of the product is completely symmetrical and equal in length.
View Details View Details
< 12 >